Konica Minolta Bizhub 215 User Manual
Page 71
bizhub 215
4-31
4.3
Administrator mode
4
Tips
-
The [Fax Configuration] menu is displayed only for models in which the FAX Kit FK-510 is installed.
-
[Tray Lock] displays different trays depending on what optional trays are installed.
Item
Description
[User Name]
Enter the sender name.
[Fax Number]
Enter the sender fax number.
[Scan Contrast]
Select the scan contrast.
[Image Quality]
Select the image quality.
[Default TX]
Select the priority transmission mode.
[Header]
Select whether to enable the header.
[Memory RX Mode]
Select whether to enable the Memory RX mode.
When enabling the Memory RX mode, enter reception start time
and end time, and password.
[Auto RX Mode]
Select whether to enable the Auto RX mode.
[Number of Rings]
Specify the number of phone rings before the machine answers an
incoming call.
[Footer Enable]
Select whether to enable the footer print.
[Reduction RX]
Specify whether to receive large-size originals by reducing the size.
[Print at Receiving]
Specify the print timing of received data.
[Forward Mode]
Specify whether to forward receive fax documents.
Print only: Does not forward received fax documents.
Forward: Forwards received fax documents to the specified fax
number or E-mail address.
Print & Forward: Forwards received fax documents to the specified
fax number or E-mail address, and prints on this machine at the
same time.
[Forward Address]
Enter the destination address (fax number or E-mail address) when
[Forward] or [Print & Forward] is specified for [Forward Mode].
[Basic Mode/Advanced Mode]
Specify the mail mode (basic mode, advanced mode) used for
sending an Internet fax.
[Max TX Size]
Specify the upper limit of transmission size for sending in the ad-
vanced mode.
[Max Resolution]
Specify the upper limit of transmission image quality for sending in
the advanced mode.
[Coding Mode]
Specify the upper limit of compression coding system for sending
scan data in the advanced mode.
[Closed Network RX]
Specify the closed network.
[Tone/Pulse]
Specify either to use tone or pulse dialing.
[Line Monitor Volume]
Specify the line monitor volume.
[PSTN/PBX]
Specify whether to use PSTN or PBX. To use a PBX, enter an ex-
ternal calling number.
[Reporting]
Specify the reports to be printed.
[Tray Lock]
Specify the tray to be disabled.