Konica Minolta Bizhub 215 - Manual (Page 13)

bizhub 215 3-2
3.1 Network settings 3
3 Network settings
This chapter describes network settings to be configured on the Control Panel.
3.1 Network settings
Depending on the network environment to which this machine is connected, the available network functions
may be limited. Configure the network according to the functions you are using and the environment involved.
Before starting network configuration, contact your network administrator to confirm necessary information.
Tips
- Configure the Network Settings via the Control Panel or via the Administrator mode screen in Page-
Scope Web Connection. For details on PageScope Web Connection, refer to page 4-2.
List of Network Settings
Functions Description Scan To E-
mail Scan To
Server
(FTP/SMB) Settings
Control Panel PageScope
Web Connec-
tion
.: Required, -: Not required, -: As needed . : Setting enabled
-: Setting disabled
NETWORK SETTING
IP ADDRESS Specify the IP
address for
this machine. .
*
1 .
*
1 . .
SUBNET
MASK Specify a sub-
net mask val-
ue for the
network. .
*
1 .
*
1 . .
GATEWAY Specify a de-
fault gateway
(the IP ad-
dress of the
router) if a
router is incor-
porated in
your network. . * 1 . * 1 . .
IPv6 * 2 Configure
IPv6-related
settings in-
cluding IP and
gateway ad-
dresses. - - . .
DNS CONFIG. Specify
whether to use
DNS (Domain
Name System)
or not. - - . .
WEB SET-
TING Enable access
to Page-
Scope Web
Connection. . . . -
LPD SETTING Specify the
protocol for
printing via the
TCP/IP net-
work. - - . .