Konica Minolta Bizhub 215 - Manual (Page 37)

bizhub 215 3-26
3.7 LDAP Setting 3
3.7.2 Setting the LDAP port number
1
Press +, to select [LDAP PORT NO.], then press OK.
2
Enter the port number.
% For the port number, you can specify a value between 1 and 65535. Normally, use port number 389.
When you are enabling SSL, use port number 636.
3
Press OK.
[ACCEPTED] appears, and the screen returns to the LDAP Setting screen.
3.7.3 Enabling/disabling SSL
1
Press +, to select [SSL SETTING], then press OK.
2
Press +, to select [DISABLE] or [ENABLE], then press OK.
Whichever of [DISABLE] or [ENABLE] is selected, [ACCEPTED] appears and the screen returns to the
LDAP Setting screen.
3.7.4 Setting the search base
1
Press +, to select [SEARCH BASE], then press OK.
2
Enter the name of the database to search for the LDAP server.
% You can enter up to 64 characters for the search base.
3
Press OK.
[ACCEPTED] appears, and the screen returns to the LDAP Setting screen.