Konica Minolta bizhub 42 - Manual (Page 21)

bizhub 42/36 3-3
3.1 Connecting to network 3
3.1.2 Communicating using IPv6
Reference
- If the IPv6 environment does not operate normally, the machine cannot be connected to the IPv4 net-
work. In this case, disable settings for IPv6.
Configure settings for IPv6 communication.
These settings are required if you want use this machine with an IPv6 address assigned. You can use IPv6
together with IPv4, but you cannot use IPv6 alone.
When you use this machine in an IPv6 environment, the following restrictions apply.
- No scanned data can be sent with SMB (but it is allowed for the Direct Hosting service).
- NTLM authentication is not supported (but it is allowed for the Direct Hosting service).
- You cannot use the IP filtering function.
- You cannot use the installer of the printer driver (available for Windows Vista/7/Server 2008/Server 2008
R2).
d
Reference
For details on the Direct Hosting service, refer to the sections listed below.
[Direct Hosting Settings] (p. 5-131)
[TCP/IP]
In [Admin Settings] on the Control Panel, select [Ethernet] ö [TCP/IP].
For details on the menu structure of the [Ethernet] in the Control Panel, refer to page 4-10.