6 [ipp settings, Ipp settings] -123 – Konica Minolta bizhub 42 User Manual
Page 211
bizhub 42/36
5-123
5.7
[Network] tab
5
5.7.6
[IPP Settings]
Configure the settings for IPP function.
Select [Network] ö [IPP Settings] ö [IPP Settings].
Item
Description
Control Panel
[IPP Print]
Select whether or not to use IPP.
[Accept IPP Job]
Select whether or not to accept IPP jobs.
[Printer Name]
Enter a printer name (up to 127 characters).
[Printer Location]
Enter a printer location (up to 127 characters).
[Printer Information]
Enter printer information (up to 127 characters).
[Printer URI]
Displays the URI of the printer that can print data
using the IPP.
[Operational Support]
Select the check box of each job to be executed
using the IPP.
[Print Job]
Select whether to allow a print job.
Select this check box to enable IPP printing.
[Validate Job]
Select whether to allow confirmation of a valid job.
[Cancel Job]
Select whether to allow canceling the job.
[Get Job Attributes]
Select whether to obtain job attributes.
[Get Jobs]
Select whether to obtain a list of job attributes.
[Get Print Attributes]
Select whether to obtain printer attributes.
[IPP Authentication]
Select an authentication method.
[User Name]
Enter a user name (up to 20 characters, excluding
a colon (:)).
This entry is required if you have selected [Basic]
or [Digest] for the [IPP Authentication].
[Change Password]
Select this check box to change the password.