1 [tcp/ip, 2 external server settings, Tcp/ip] -5 – Konica Minolta bizhub 42 User Manual
Page 239: External server settings -5
bizhub 42/36
6-5
6.2
Restricting users of this machine (Active Directory)
6
6.2
Restricting users of this machine (Active Directory)
Configure settings to restrict users who use this machine by Active Directory authentication.
These settings are required if you wish to use the user authentication with Active Directory on the Windows
Server. You can restrict the functions available to each user.
You can also restrict users who use this machine using Active Directory authentication in an IPv6 environment
configured by the Active Directory function of Windows Server 2008/Server 2008 R2.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
6.2.1
[TCP/IP]
Configure settings to use this machine in the TCP/IP network environment.
-
To use Active Directory, register the DNS server connected to Active Directory in this machine.
-
To perform Active Directory authentication in an IPv6 environment configured by the Active Directory
function of Windows Server 2008/Server 2008 R2, configure IPv6. For details on the IPv6 settings, refer
to page 3-3.
For details, refer to page 3-2.
6.2.2
External Server Settings
Configure external server (Active Directory) registration settings.
(If you use PageScope Authentication Manager for authentication, this item is not displayed.)
For details, refer to page 5-29.
Finish