12 [security settings, 1 [administrator password, Security settings] -37 – Konica Minolta bizhub 42 User Manual
Page 62: Administrator password] -37
bizhub 42/36
4-37
4.12
[Security Settings]
4
4.12
[Security Settings]
Configure the settings for the restricting the functions of this machine for processing secret data.
4.12.1
[Administrator Password]
Change the administrator password.
0
The administrator password can be entered using 0 through 8 digits.
0
If password rules are specified, an 8-digit password must be entered.
0
If you enter an incorrect administrator password a configured number of times, you are prohibited from
using this machine. In this case, turn the power of the machine off and on again.
1
Press the Utility/Counter key ö [Admin Settings] ö [Security Settings] ö [Administrator Password].
2
Press the upper [Password] button, enter a new administrator password, and press [OK].
3
Press the lower [Password] button, enter a new administrator password, and press [OK].
4
Press [OK].
The password is changed.
d
Reference
To configure password rule settings:
Press the Utility/Counter key ö [Admin Settings] ö [Security Settings] ö [Security Details] ö [Password
Rules].
Factory default
[Administrator Password]
12345678