8 [snmp settings, Snmp settings] -127 – Konica Minolta bizhub 42 User Manual
Page 215
bizhub 42/36
5-127
5.7
[Network] tab
5
5.7.8
[SNMP Settings]
Configure the settings for SNMP function.
Select [Network] ö [SNMP Settings] ö [SNMP Settings].
Item
Description
Control Panel
[SNMP]
If [Enable] is selected, SNMP is enabled.
[SNMP v1/v2c(IP)]
If [Enable] is selected, SNMPv1/v2c (IP) is ena-
bled.
[SNMP v3(IP)]
If [Enable] is selected, SNMPv3 (IP) is enabled.
[SNMP v1(IPX)]
If [Enable] is selected, SNMPv1 (IPX) is enabled.
[UDP Port]
Enter a UDP port number.
The currently used port number cannot be speci-
fied.
[SNMP v1/v2c Settings]
Configure the settings for SNMP v1/v2c.
[Read Community Name]
Enter a community name used for reading (up to
15 characters, excluding " ' # \ and space).
[Write]
If [Enable] is selected, the Write function is ena-
bled.
[Write Community Name]
Enter a community name used for reading and
writing (up to 15 characters, excluding " ' # \ and
space).
[SNMP v3 Settings]
Configure the settings for SNMP v3.