Konica Minolta bizhub 42 User Manual
Page 81
Advertising
bizhub 42/36
4-56
4.18
[Fax Settings]
4
The following items are not available if Forward TX Setting is configured.
-
PC-Fax RX Settings
-
Memory RX
-
Nighttime RX Settings
Reference
-
If a document with a resolution of 300 e 300 dpi is received as an Internet Fax, it can not be forwarded
to a fax (G3) destination. In this case, this machine prints the document.
If [Confirm Addr (Register)] is [ON], a screen for entering the fax number again appears after you press [OK].
Enter the fax number and then press [OK].
d
Reference
For details on the Confirm Address function, refer to page 4-53.
Factory default
[Forward TX Setting]
[OFF]
[Forward & Print]
[Forward & Print (If TX Fails)]
Advertising
This manual is related to the following products: