Setup, Setup -7 – Konica Minolta bizhub 42 User Manual
Page 256
Advertising
bizhub 42/36
7-7
7.1
Using authentication unit
7
Setup
1
Turn the Power Switch of this machine off, and disconnect the authentication unit from this machine.
2
Install IC Card Driver (USB-Driver).
Connect the authentication unit to the USB port of your computer.
The [Found New Hardware] dialog box appears.
3
Select [Locate and install driver software (recommended)].
4
Insert the application CD-ROM provided with the authentication unit into the CD-ROM drive of the com-
puter.
5
Click the [Browse my computer for driver software (advanced)].
Advertising
This manual is related to the following products: