Konica Minolta bizhub 42 - Manual (Page 224)

bizhub 42/36 5-136
5.7 [Network] tab 5
5.7.12 [NetWare Settings]
Configure settings for printing in a NetWare environment.
[NetWare Settings]
Select [Network] ö [NetWare Settings] ö [NetWare Settings].
d
Reference
For details on how to install the printer driver, refer to the [User's Guide Print Operations].
Item Description
[IPX/SPX] If [Enable] is selected, the IPX/SPX function is enabled.
[Ethernet Frame Type] Select a frame type to be used.
[NetWare Print Mode] Select the NetWare configuration mode.
[Print Server Name] Enter a print server name to be operated as PServer (up to 63 characters,
excluding / \ : ; , * [ ] < > | + = ? .).
[Change Password] Select this check box to change the password.
[Print Server Password] Enter a print server password if necessary (up to 63 characters).
[Print Queue Scan Rate] Set a job inquiry interval.
[Bindery/NDS] Select the bindery options.
[Preferred File Server] Enter the priority file server name to be used in the Bindery emulation mode
(up to 47 characters, excluding / \ : ; , * [ ] < > | + = ? .).
[Preferred NDS Context
Name] Enter an NDS context name for print server connection (up to 191 charac-
ters, excluding / \ : ; , * [ ] < > | + = ?).
[Preferred NDS Tree Name] Enter an NDS tree name for print server connection (up to 63 characters,
excluding / \ : ; , * [ ] < > | + = ? .).
[Printer Name] Enter a printer name to be operated as the NPrinter/RPrinter (up to 63 char-
acters, excluding / \ : ; , * [ ] < > | + = ? .).
[Printer Number] Enter the NPrinter/RPrinter number.