16 [openapi settings, Openapi settings] -144 – Konica Minolta bizhub 42 User Manual
Page 232
bizhub 42/36
5-144
5.7
[Network] tab
5
5.7.16
[OpenAPI Settings]
Configure the settings for OpenAPI function.
Select [Network] ö [OpenAPI Settings] ö [OpenAPI Settings].
Item
Description
[OpenAPI]
Select whether or not OpenAPI is used.
[Port Number]
Enter a port number.
The currently used port number cannot be specified.
[SSL/TLS]
Select whether or not SSL/TLS is used.
You can configure this setting if device certificate(s) is registered in [Secu-
rity] ö [PKI Settings] ö [Device Certificate].
[Port Number (SSL/TLS)]
Enter the port number to be used for SSL communication.
The currently used port number cannot be specified.
[Authentication]
Select whether or not to perform OpenAPI authentication.
[Login Name]
Enter the login name used with OpenAPI authentication (up to 8 charac-
ters, excluding symbols).
[Change Password]
Select this check box to change the password.
[Password]
Enter the password used with OpenAPI authentication (up to 8 characters,
excluding symbols).