Konica Minolta bizhub 42 - Manual (Page 45)

bizhub 42/36 4-20
4.8 [Copy Settings] 4
4.8 [Copy Settings]
Configure the settings used by the copy functions.
%
Press the Utility/Counter key ö [Admin Settings] ö [Copy Settings].
Settings
[Specify Tray When APS
OFF] Configure which paper tray to be selected when the APS (Auto Paper) set-
ting is canceled.
[Tray Before APS ON] Uses the paper tray specified before the APS was
selected.
[Default Tray] Uses Tray 2.
[Paper Priority] Specify the paper tray that is normally used.
Factory default
[Specify Tray When APS
OFF] [Tray Before APS ON]
[Paper Priority] [Tray 2]