Konica Minolta bizhub Secure - Manual (Page 30)

bizhub 652/552 2-15
2.4 Canceling the Operation Prohibited State 2
2.4 Canceling the Operation Prohibited State
When access to the machine by the Administrator of the machine through the Administrator Settings from
the control panel is authenticated, the machine enables the operation of Release Setting performed for can-
celing the state of Prohibited Functions When Authentication Error (access lock state) as a result of unautho-
rized access.
Release Setting clears the unauthorized access check count for all User Authentication, Account Track,
SNMP authentication, WebDAV authentication, all Secure Print authentication, and all User Box authentica-
tion, resetting it to zero and canceling the operation prohibited state. Perform the following procedure to can-
cel the operation prohibited state.
Performing Release Setting
0 For the procedure to call the Security Details screen on the display, see steps 1 and 2 of page 2-13.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
0 When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
Here is the sequence, through which the main power switch and sub power switch are turned on and
off:
Turn off the sub power switch ö Turn off the main power switch ö Turn on the main power switch ö
Turn on the sub power switch
1
Call the Security Details screen on the display from the control panel.
2
Touch [Prohibited Functions When Authentication Error].
Operation Prohibited State Canceling procedure
Administrator Settings • The Service Engineer presses the [Administrator unlocking] key
to cancel the operation prohibited state.
• The operation prohibited state is canceled after the main power
switch is turned off and on and the period of time set in [Re-
lease Time Settings] elapses.
User/Account authentication The Administrator presses the [Release] key to cancel the opera-
tion prohibited state.
Secure Print authentication
User Box authentication
SNMP authentication
WebDAV authentication