Konica Minolta FK-505 - Manual (Page 108)

6.1 Setting Up the Fax Registration 6
Fax kit FK-505 6-9
Us
ing t
he Ut
ility
Mo
de
(F
ax
)
Ch
apt
er
6
❍ For details on F codes (SUB and SID), refer to “Using F codes” on
page 4-26.
7 Press the [
▼] key, and then use
the 10-Key Pad to enter the SUB.
❍ A number up to 20 digits long
can be entered for the SUB.
❍ To enter an SID, continue with
step 8.
❍ To correct the SUB, hold down the [No/C] key to erase the existing number,
and then enter the new number.
❍ If an SID will not be entered, skip to step 9.
8 Press the [ ▼] key, and then use
the 10-Key Pad to enter the SID.
❍ A number up to 20 digits long
can be entered for the SID.
❍ To correct the SID, hold down
the [No/C] key to erase the existing number, and then enter the new number.
9 Press the [Yes] key.
10 Using the [ ] and [Ö ] keys, select
the desired modem speed.
11 Press the [Yes] key.
The settings are registered.
To program another speed dial number, repeat steps 3 through 11.
12 Press the [No/C] key to finish
programming.
The “FAX REGISTRATION” menu
appears again.
Ц