Konica Minolta FK-505 - Manual (Page 46)

3.1 Dialing 3
Fax kit FK-505 3-7
Fa
xin
g
Chap
ter
3
To fax using program dialing
If one-touch dial keys have already been programmed with fax numbers and a
transmission/reception function (such as timer transmission or polling reception),
that function can be carried out by pressing just the corresponding one-touch dial
key.
For details on setting program dialing, refer to “Specifying the Setting for
“PROGRAM DIAL”” on page 6-15.
1 Load the document into the Automatic document feeder.
❍ For details on placing the document on the Original glass, refer to “To fax
documents positioned on the Original glass” on page 3-13.
❍ This step is not necessary with polling reception.
2 If necessary, change the “Resolution” setting (p. 3-11).
❍ This step is not necessary with polling reception.
3 Press the one-touch dial key ([24]
through [27]) programmed with the
desired function.
✎
Tip
If the wrong one-touch dial key
has been pressed, press the
[No/C] key.
4 Press the [Start] key.
The programmed function
automatically begins.
✎
Tip
To stop the fax transmission, press the [Stop] key, and then press the [Yes] in
the next screen that appears.
To cancel a timer transmission, select “CANCEL RESERV.” from the
“FUNCTION” menu (p. 4-20).