Konica Minolta FK-505 - Manual (Page 157)

7 7.1 Specifications
7-2 Fax kit FK-505
Ap
pen
dix
Chap
ter
7
7.1 Specifications
Specifications
Transmission mode G3
Wiring application General subscriber telephone line, NCC each line
Connection method Direct connection (using a modular jack)
Transmission speed 33.6, 31.2, 28.8, 26.4, 24.0, 21.6, 19.2, 16.8, 14.4, 12.0, 9.6, 7.2,
4.8, 2.4 kbps (automatic switching)
Transmission time 3 seconds*
Scanning density 8 dots/mm × 3.85/7.7/15.4 lines/mm, 16 dots/mm × 15.4 lines/mm**
Document size Maximum Ledger w, continuous documents (maximum 1000 mm)
possible
Report paper size Ledger (11 × 17) w, Legal (8-1/2 × 14) w, Letter (8-1/2 × 11) w/v,
Invoice (8-1/2 × 5-1/2) v
Scanning storage With built-in memory (5 MB): 280 pages
With expanded memory (64 MB): 1024 pages
(With Letter documents)
Coding MH, MR, MMR, JBIG
* This is the speed for transmitting an Letter-size document containing approximately 700 characters
at high-speed (33.6 kbps) using the standard resolution (8 dots/mm×3.85 lines/mm). The
transmission time for only the image information and the communication control time are not
included. In addition, the actual transmission time differs depending on the contents of the
document, the recipient’s fax machine and the condition of the wiring.
** Direct transmission is supported only with the Automatic document feeder.