Konica Minolta FK-505 - Manual (Page 161)

7 7.3 When Faxing Is Not Performed Correctly
7-6 Fax kit FK-505
Ap
pen
dix
Chap
ter
7
Calls Cannot Be Sent
Symptom Possible Cause Remedy
Nothing can be heard from the
connected telephone. The cord from the telephone is
not connected correctly to the
main unit. Correctly connect the telephone
cord to the main unit.
The telephone cord from the
wall jack is not connected
correctly to the main unit. Correctly connect the telephone
cord from the wall jack to the
main unit.
Transmitting. Check again after the
transmission is finished.
After dialing, the ringing cannot be
heard. The telephone dialing system is
not set correctly. Correctly set the telephone
dialing system. (p. 6-44)
After the [Speaker] key is pressed,
it is difficult to hear the recipient/
caller’s voice. The monitoring volume is too
low. Increase the monitoring
volume. (p. 6-45)
The ringing of the telephone is too
low (loud). The ringer volume of the
connected telephone is set too
low (loud). Adjust the ringer volume of the
connected telephone.