Konica Minolta FK-505 - Manual (Page 170)

7.6 Local Setup for Diagnostic (LSD) 7
Fax kit FK-505 7-15
Ap
pen
dix
Chap
ter
7
Outline of setup
Before using LSD, the machine must be connected to the computer, and LSD must
be installed on the computer.
1 Connect the machine to the computer.
2 Install the TWAIN driver and printer driver included with the machine.
❍ For details on the installation procedure, refer to the corresponding manuals
for the printer driver and the TWAIN driver.
3 Install LSD onto the computer.
❍ For details on the installation procedure, refer to “Installing LSD” on
page 7-16.