Konica Minolta FK-505 - Manual (Page 45)

3 3.1 Dialing
3-6 Fax kit FK-505
Fa
xin
g
Chap
ter
3
To fax using chain dial
Faxes can be sent to recipients that are specified using any combination of one-
touch dial keys, speed dial numbers, direct input using the 10-Key Pad, and the
[Redial] key.
As an example, the following procedure describes how to specify recipients using
one-touch keys, then using the 10-Key Pad.
1 Press the [Speaker] key.
2 Press the desired one-touch key,
and then press the [Start] key.
3 After the message “SET DOC.
FACE UP” appears, use the 10-
Key Pad to enter the recipient’s fax
number.
4 After the message “SET DOC.
FACE UP” appears, load the
document into the Automatic
document feeder.
5 Press the [Start] key.
✎
Tip
To stop the fax transmission, press the [Stop] key, and then press the [Yes] in
the next screen that appears.