Relay initiation transmission, To fax using relay initiation transmission – Konica Minolta FK-505 User Manual

Page 75

Advertising
background image

4

4.1 Transmission Methods

4-14

Fax kit FK-505

F

a

x T

ran

sm

is

si

on

/R

ec

ep

ti

o

n

Me

th

od

s

Ch

apte

r 4

Relay Initiation Transmission

Documents can be sent from this machine (transmitting station) to another fax
machine (acting as a relay station), which then sends the documents to multiple
recipients (receiving stations). By relaying the documents through a fax machine
closer to the remote recipients, the transmission time and cost for the transmitting
station are reduced.

In order to fax using relay initiation transmission, a relay box must first be
programmed at the relay station.

Note
Relay initiation transmission is compatible with F code transmission.
Only machines that are compatible with relay broadcast transmission should be
specified as relay stations. This machine can be specified as a relay station.
Relay initiation transmission and mailbox transmission cannot be performed at
the same time.
In order to fax using relay initiation transmission, a relay box ID must first be
programmed at the relay station (p. 6-21
).

To fax using relay initiation transmission

1

Position the document to be faxed.

2

If necessary, change the “Resolution” setting (p. 3-11).

3

Press the [Function] key.

4

Press the [7] key from the 10-Key
Pad.
or
Press the [Function] key seven
times to select “RELAY INITIATE”,
and then press the [Yes] key.

Advertising
This manual is related to the following products: