Konica Minolta FK-505 - Manual (Page 91)

5 5.1 Utility Mode
5-2 Fax kit FK-505
Us
ing th
e Ut
ility
Mo
de
Cha
p
ter 5
5.1 Utility Mode
There are sixteen menus in the Utility mode.
* Only the description for specifying settings for the fax functions is described here.
For details on the settings, refer to the bizhub 162/180 User’s Guide.
The utility mode settings can also be specified from LSD (Local Setup for
Diagnostic). For details, refer to “About Local Setup for Diagnostic (LSD)” on
page 7-14.
✎
Note
Depending on the installed options and specified installation region, some Utility
mode functions cannot be set.
No. Name Description
1 MACHINE SETTING Used to specify settings for the machine’s operating environment.*
2 PAPER SOURCE
SETUP Used to specify the size and type of paper loaded in Tray1. In addition,
auto tray switching can be enabled for each tray.
3 USER MANAGEMENT For details on this menu, refer to the bizhub 162/180 User’s Guide.
4 ADMIN.MANAGEMENT
5 COPY SETTING 1
6 COPY SETTING 2
7 FAX REGISTRATION Used to specify the default setting for each fax function.
8 TX OPERATION Used to specify the default setting for TX operation.
9 RX OPERATION Used to specify the default setting for RX operation.
10 COMM. SETTING Used to specify the default setting for communicating environment.
11 REPORTING Used to specify the default setting for each report function.
12 INITIAL USER DATA Used to specify setting for the initializing user data.
13 NETWORK SETTING Available only if the optional Network interface card NC-502 is
installed. For details, refer to the User’s Guide for the Network
Interface Card NC-502.
14 E-MAIL SETTING 1 Available only if the optional Scanner unit SU-502 is installed. For
details, refer to the User’s Guide for the Scanner Unit SU-502.
15 E-MAIL SETTING 2
16 SCAN SETTING