Konica Minolta bizhub C550 - Manual (Page 107)

Scanning 2
C550 2-68
4
To specify advanced settings, touch [Detailed Settings], and then
specify the settings.
5
Touch [OK], and then touch [OK] in the next screen that appears.
6
Touch [Scan Settings], [Original Settings] or [Communication Settings],
and then specify the desired scan settings.
– For details on the scan settings, refer to “Specifying scan and
transmission settings (Scan Settings/Original Settings/Communi-
cation Settings)” on page 2-75.
7
Load the document into the ADF or place it on the original glass.
8
If desired, press the [Proof Copy] key to check a preview image.
– For details, refer to “Sending after previewing” on page 2-20.
9
Press the [Start] key in the control panel.
Scanning of the document begins, and the data is sent.
2
Note
Do not turn off the machine until the scan job is deleted from the Job List
screen.