Konica Minolta bizhub C550 User Manual

Page 81

Advertising
background image

Scanning

2

C550

2-42

3

Type in the address of the destination, and then touch [OK].

To specify additional destinations, repeat steps 2 and 3.

Frequently entered user names and domain names can be regis-
tered to be recalled and used again. First, prefixes and suffixes
must be registered in Administrator mode.

The entered addresses appear under “Broadcast Destinations”.

4

Touch [Scan Settings], [Original Settings] or [Communication Settings],
and then specify the desired scan settings.

For details on the scan settings, refer to “Specifying scan and
transmission settings (Scan Settings/Original Settings/Communi-
cation Settings)” on page 2-75.

5

Load the document into the ADF or place it on the original glass.

6

If desired, press the [Proof Copy] key to check a preview image.

For details, refer to “Sending after previewing” on page 2-20.

7

Press the [Start] key in the control panel.

Scanning of the document begins, and the data is sent.

2

Note

Do not turn off the machine until the scan job is deleted from the Job List
screen.

Advertising