Konica Minolta bizhub C550 - Manual (Page 205)

Specifying Utility mode parameters 3
C550 3-38
!
Detail
To check registered body text, select it, and then touch [Check Job Set.].
To change a registered body text, select it, and then touch [Edit].
To delete a registered body text, select it, and then touch [Delete].
To change the default setting, select a body text, and then touch [Set as
Default].
2
Note
The registration cannot be completed if no setting is specified for “Body”.
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter]
key. Otherwise, exit the Utility mode by touching [Close] in each screen
until the screen for the Copy, Fax/Scan or Box mode appears.