Konica Minolta bizhub C550 - Manual (Page 201)

Specifying Utility mode parameters 3
C550 3-34
10
Touch [OK], and then touch [OK] in the next screen that appears.
The Group destination is registered.
!
Detail
To check a registered destination, select it, and then touch [Check Job
Set.].
To change the settings for a registered destination, select it, and then
touch [Edit].
To delete a registered destination, select it, and then touch [Delete].
2
Note
The registration cannot be completed if no settings are specified for
“Name” and “Destination”.
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter]
key. Otherwise, exit the Utility mode by touching [Close] in each screen
until the screen for the Copy, Fax/Scan or Box mode appears.