Konica Minolta bizhub C550 - Manual (Page 299)

Network Settings 4
C550 4-53
4.6 FTP Settings
Specify the communication settings where an FTP server is used.
FTP TX Settings
Specify the settings for sending scan data to an FTP server. Settings can be
specified for the following.
1
Touch [5 Network Setting] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
“Displaying the Administrator Settings screen” on page 3-7.
2
Touch [4 FTP Settings] in the Network Settings screen.
3
Touch [1 FTP TX Settings].
FTP TX screen 1/2 appears.
Parameter Description
Proxy Server Ad-
dress Specify the address of the proxy server. Type in the address in the format
of a host name, IPv4 address or IPv6 address.
Proxy Server Port
Number Specify the port number for the proxy server. To change the setting,
press the [C] (clear) key, and then use the keypad to type in the desired
port number. (Range: 1 to 65535)
Port No. Specify the number of the port used for communicating with the FTP
server. To change the setting, press the [C] (clear) key, and then use the
keypad to type in the desired port number. (Range: 1 to 65535)
Connection Timeout If transmission stops while data is being uploaded to the FTP server, the
upload operation is automatically aborted after a specified length of time
has passed. Specify the length of time from the point when the transmis-
sion stops to the point when the upload operation is to be aborted. To
change the setting, press the [C] (clear) key, and then use the keypad to
type in the setting. (Range: 5 to 300 seconds)