Konica Minolta bizhub C550 - Manual (Page 220)

Specifying Utility mode parameters 3
C550 3-53
2
Note
To finish specifying settings in the Utility mode, press the [Utility/Counter]
key. Otherwise, exit the Utility mode by touching [Close] in each screen
until the screen for the Copy, Fax/Scan or Box mode appears.
If optional image controller IC-409 has been installed this parameter is
not available.
If access to this machine using KONICA MINOLTA TWAIN, control panel
is locked. It is automatically unlocked at the specified time.
Default Scan/Fax Settings
Specify the default settings (settings selected when the [Reset] key is
pressed) for the Fax/Scan mode screen.
1
Touch [4 Scan/Fax Settings] in the User Settings screen.
– For details on displaying the User Settings screen, refer to “Display-
ing the User Settings screen” on page 3-6.
2
Press the [Default Scan/Fax Settings] key.