Konica Minolta bizhub C550 - Manual (Page 368)

Network Settings 4
C550 4-122
4.20 Time Adjustment Setting
The machine’s system clock can be correctly adjusted via the network. In or-
der to use NTP to automatically adjust the date/time, the time zone must be
specified first. For details on specifying the time zone, refer to the User’s
Guide [Copy Operations]. Settings can be specified for the following.
2
Reminder
After the setting is specified, touch [Set Date] (displayed by touching [1
System Settings] on the Administrator Settings screen, then [Date & Time
Setting]). The automatic adjustment will not be performed periodically.
1
Touch [5 Network Setting] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
“Displaying the Administrator Settings screen” on page 3-7.
2
Touch [Fwd. →] in the Network Settings screen, and then touch [5 De-
tail Settings].
3
Touch [2 Time Adjustment Setting].
The Time Adjustment Setting screen appears.
4
To adjust the time, touch [ON], and then specify the desired settings.
Parameter Description
NTP Server Setting Specify the address of the NTP server. For details, refer to “NTP
server address” on page 4-123.
Port Number Specify the number of the port used for communicating with the
NTP server. To change the setting, press the [C] (clear) key, and
then use the keypad to type in the desired port number. (Range: 1
to 65535)