Konica Minolta Bizhub 215 - Manual (Page 38)

bizhub 215 5-4
5.1 Basic transmission method 5
5.1.2 When setting an original on the Original Glass
1
Press the Scan key.
The machine switches to the scan mode.
2
Set the original onto the Original Glass.
% For details on how to set the original, refer to [User's Guide Copy Operations].
3
Enter the E-mail address of the destination.
% A maximum of 64 characters can be entered.
% Pressing , enables the subject, CC address, file format, and compression coding method to be
changed. For details, refer to page 5-6.
% The destination may be specified by the following method.
% One-touch Dial can be used to select the destination. For details, refer to page 5-14.
% Speed dial can be used for selecting the destination. For details, refer to page 5-15.
% Telephone directory can be used to select the destination. For details, refer to page 5-17.
4
Press the Start key.
5
Press +,, then select [AUTO DETECTION] or [MANUAL].
% If [AUTO DETECTION] is selected, press OK and go to Step 8.
% If [MANUAL] is selected, scanning size can be selected. Press ) and go to Step 6.
6
Press +, to select desired scanning size, then press OK.
% By pressing [INCH] or [METRIC], the measuring scanning size can be changed.
7
Press OK.