Konica Minolta bizhub 181 - Manual (Page 23)

2 Installing the printer driver
2-10 GDI Printer Controller
– The folder can be selected after clicking the [Browse] button.
6
Click the [Next] button.
– In the Windows Security dialog box, select “Install this driver soft-
ware anyway”.
7
After the installation is finished, click the [Close] button.
The installation of the TWAIN driver is finished.
The Found New Hardware wizard appears again, and the installation of
the printer driver begins.
8
Repeat steps 2 through 7 to install the printer driver.
Installing using Plug and Play on Windows 2000
2
Note
If the driver is installed using Plug and Play, first the TWAIN driver for
scanning is installed, and then installation of the printer driver begins. The
procedure described in this manual is for the installation of the TWAIN
driver, then the printer driver. For details on the TWAIN driver, refer to the
User’s Guide for the TWAIN driver.
Follow the instructions that appear in the Found New Hardware Wizard to
complete the installation.