Konica Minolta bizhub 181 - Manual (Page 80)

Control panel operations 4
GDI Printer Controller 4-3
Printer indicator
The “Printer” indicator shows the status of the printer data sent from the
computer.
Starting the print operation
Normally, printing begins when printing is performed from a connected com-
puter.
-
Normally, when printing is performed from a connected computer, print-
ing begins automatically.
- If a print operation is performed from a connected computer while the
machine is copying, printing begins automatically when no copy opera-
tion is performed for 30 seconds.
- When using the optional fax kit: If print data is received while fax data is
being received, the printing of print data has priority.
After the reception job is completed in Fax mode, the print data is printed,
and then the fax is printed.
- While printing, copy settings can be specified and fax operations can be
performed. (Copies and faxes are printed after printouts are printed.)
Printer indicator Printing status
Flashing • The machine is receiving print data. The indicator also flashes in
other modes.
• An error has occurred in the machine.
Lit • Print data is being printed. Instead of flashing, the indicator re-
mains lit when data is being received during printing.
Off • There is no print data in the machine’s memory.