Konica Minolta bizhub 181 - Manual (Page 57)

3 Specifying printer driver settings
3-14 GDI Printer Controller
4
In the “Dimensions” group box, specify the width and length of the pa-
per.
– To change the units for specifying the paper size, select the desired
setting in the “Unit” group box.
5
Click the [OK] button in the lower-right corner of the Custom Size Set-
tings dialog box.
The paper size settings in the Custom Size Settings dialog box are hid-
den.
6
Click the [OK] button in the Custom Size Settings dialog box.
The non-standard size is registered and can be selected from the list
of paper sizes.
2
Note
To change the width and length of a registered non-standard size, select
the paper size in the Custom Size Settings dialog box, click the [Edit] but-
ton, and then change the settings. The name cannot be changed.
To delete a registered non-standard size, select the paper size in the
Custom Size Settings dialog box, and then click the [Delete] button.
A maximum of 20 characters can be entered for the registered name.
A maximum of 32 sizes can be registered.