Konica Minolta bizhub 181 - Manual (Page 59)

3 Specifying printer driver settings
3-16 GDI Printer Controller
Zoom
Specify the enlargement or reduction ratio to be used for printing.
Select “Manual”, and then type in a number between 25% and 400%, or
click the arrows to specify a setting.
2
Note
If any setting other than “Same as Original Size” is selected in the “Output
Size” list, “Manual” cannot be selected.
Copy
Specify the number of copies to be printed.
Type in a number between 1 and 99, or click the arrows to specify a setting.
Original
Reduced Enlarged