Konica Minolta bizhub 181 - Manual (Page 81)

4 Control panel operations
4-4 GDI Printer Controller
Canceling a print job
Printing of a print job can be canceled from the control panel of the ma-
chine’s control panel. However, a print job can only be canceled from the
control panel while the machine is in Printer mode.
1
Check that the Printer indicator is flashing or is lit, and then press the
[Printer] key.
2
Check that “PRINTER MODE PRINTING” appears in the machine’s dis-
play.
– The message that appears differs depending on the status of the
machine.
3
Press the [Clear/Stop]
key.
The confirmation message “JOB CANCEL” appears.