Konica Minolta bizhub 181 - Manual (Page 25)

2 Installing the printer driver
2-12 GDI Printer Controller
– Folder to be specified: \Driver\Win98_ME\English
– The folder can be selected after clicking the [Browse] button.
3
Click the [Next] button.
4
Check the location of the driver, and then click the [Next] button.
A dialog box appears, indicating that the installation is finished.
5
Click the [Finish] button.
This completes the installation of the TWAIN driver.
The Add New Hardware Wizard appears again, and the installation of
the USB printing support driver begins.
6
Repeat steps 1 through 5 to install the USB printing support driver.
This completes the installation of the USB printing support driver.
The Add New Hardware Wizard appears again, and the installation of
the printer driver begins.
7
Repeat steps 1 through 4 to install the printer driver.
A dialog box appears, allowing you to specify the printer name.
8
Click the [Finish] button.
– To change the printer name, type in the new name.
– To set this machine as the default, select “Yes”.
A dialog box appears, indicating that the installation is finished.
9
Click the [Finish] button.
This completes the installation of the printer driver.
Reinstalling the printer driver by using Plug and Play
1
Uninstall the printer driver while the machine is not connected to the
computer or while they are connected but the machine is turned off,
and then restart the computer.
– For details, refer to “Uninstalling the printer driver” on page 2-27.
2
Use the USB cable to connect the machine to the computer.
3
Follow the on-screen instructions to reinstall the printer driver.
– When the dialog box for specifying the folder appears, insert the
CD-ROM, and then continue the installation.