Konica Minolta bizhub 181 User Manual

Page 37

Advertising
background image

2

Installing the printer driver

2-24

GDI Printer Controller

Installing using the Add Printer Wizard on Windows Me/98 SE

2

Note

When using a USB cable to connect this machine to the computer, turn
off this machine, and then install the printer driver. When the machine is
turned on, Plug and Play causes the Add New Hardware Wizard to ap-
pear.

This machine cannot be connected to a computer running Windows 98
SE using a USB interface. The machine can only be connected to the
computer using a network connection.

1

After Windows has started, insert the printer driver CD-ROM into the
CD-ROM drive of the computer.

2

Click the Windows [Start] button, point to “Settings”, and then click
“Printers”.

The Printers window appears.

3

Double-click the “Add Printer” icon.

The Add Printer Wizard starts up.

4

Click the [Next] button.

5

Select “Local printer”, and then click the [Next] button.

In order to print on a network, the connection port must be set up
as a network port. Since the port settings can be specified after in-
stallation, this procedure describes how to install the printer driver
for a local connection. For details on specifying the port settings,
refer to the User’s Guide for the network interface card.

Advertising