Konica Minolta bizhub 181 - Manual (Page 58)

Specifying printer driver settings 3
GDI Printer Controller 3-15
Output Size
Select the size of paper that is to be used for printing.
The available standard paper sizes are same as those available in the “Orig-
inal Size” list.
If the paper size is different from the size selected in the Original Size list, the
document image will be printed enlarged or reduced so that it fits in the se-
lected paper size.
The enlargement/reduction ratio to be used for printing can be checked in
the Paper preview.
2
Note
If “Manual” is selected in the “Zoom” group box, a setting cannot be se-
lected from the “Output Size” list.
If any setting other than “Off” is selected in the “Combination” list on the
Layout tab, a setting cannot be selected from the “Output Size” list.