Philips AVENT Express Bottle and Babyfood Warmer SCF255-11 - Manual (Page 4)

6 7
De-scaling
You should de-scale your AVENT Express
Bottle Warmer every four weeks to ensure
it continues to work 100 % effectively.
Pour 2 fl oz ⁄ 50 ml of vinegar (white) mixed
with 4 fl oz ⁄ 100 ml of cold water into the
Warmer (with basket in place). Allow to stand
in the unit until any limescale has dissolved.
Empty the unit and rinse thoroughly.
Guarantee
Cannon AVENT guarantees that should
the Express Bottle Warmer become faulty
during twelve months from the date of
purchase, it will be replaced free of charge
during this time. Please return it to the
retailer where it was purchased. Please
keep your receipt as a proof of purchase.
For the guarantee to be valid, please note:
• The Warmer must be used according
to the instructions in this leaflet and
connected to a suitable electricity supply.
• The claim must not be a result of accident,
misuse, dirt, neglect or fair wear and tear.
AVENT® is here to help
Call TOLL-FREE at: 1-800-54-AVENT
AVENT America Inc., 475 Supreme Drive,
Bensenville, IL 60106, USA.
www.aventamerica.com
Important
Safeguards
When using electrical appliances, basic
safety precautions should always be
followed including the following:
1. Read all instructions.
2. To protect against electrical shock
do not immerse cord, plugs or
appliance in water or other liquid.
3. Close supervision is necessary
when any appliance is used by
or near children.
4. Unplug from outlet when not in
use and before cleaning. Allow to
cool before putting on or taking
off parts.
5. Do not operate any appliance with
a damaged cord or plug or after the
appliance malfunctions or has been
damaged in any manner.
6. The use of accessory attachments
not recommended by the appliance
manufacturer may cause injuries.
7. Do not use outdoors.
8. Do not let cord hang over edge
of table or counter, or touch
hot surfaces.
9. Do not place on or near a hot
gas or electric burner, or in a
heated oven.
10. Extreme caution must be used
when moving an appliance containing
hot oil or other hot liquids.
11. Always attach plug to appliance
first, then plug cord into the wall
outlet. To disconnect, turn any
control to "off", then remove plug
from wall outlet.
12. Do not use appliance for other than
intended use.
13. When in use the Warmer contains
hot water.
14. Before plugging in the Warmer for
the first time, ensure the voltage
is compatible with your electrical
supply by checking the label on the
base of the unit.
15. Always place bottle into Warmer
before adding water.
16. Ensure water has been added before
switching the unit on.
17. When the feed has reached the
required temperature, remove
immediately. If left in the Warmer,
the temperature of the feed will
continue to increase.
18. The AVENT Express Bottle Warmer
is fitted with a non-rewireable molded
plug. The mains supply cord of the
appliance CANNOT be replaced. If the
cord is damaged, the appliance should
be discarded.
19. This product is manufactured to
comply with the Radio Interference
Requirements and the EEC Directive
89⁄336⁄EEC.
20. A short power cord has been provided
to prevent the risk of it becoming
entangled or being tripped over.
21. Extension cords may be used if care
is exercised in their use.
22. If an extension cord is used, its
electrical rating must be as great as
the rating of the appliance and not
draped over the edge of the table top
where it could be pulled by children
or tripped over.
Save these
instructions
US US