Automatic programmes, 4 check result (selected models only), 5 setting the set+go – AEG BY9314001M User Manual
Page 14: 6 setting the minute minder, 7 setting the time delay function, 1 recipe menu
symbol and the time setting flash
in the display. The appliance deacti-
vates.
5.
Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
6.
Deactivate the appliance.
7.4 Check result (selected
models only)
If you set the END or DURATION func-
tion, two minutes before the end of
cooking an acoustic signal sounds and
the lamp activates. The appliance goes
to the setting of the END or DURATION
function. During these two minutes you
can examine the results of the cooking,
and, if necessary, add the END or DURA-
TION time.
7.5 Setting the SET+GO
1.
Set an oven function (or programme)
and temperature (refer to "Setting
the oven function" and "Changing
the temperature").
2.
Set the DURATION (refer to "Setting
the DURATION").
3.
Touch
again and again until
flashes in the display.
4.
Touch
to set the SET+GO func-
tion.
The display shows
and
with an
indicator. This indicator shows which
clock function is activated.
5.
Touch a sensor field (apart from
ON / OFF) to start the SET+GO
function.
You can use the SET+GO func-
tion only when the DURATION is
set.
7.6 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a
countdown (maximum 2 h 30 min). This
function has no effect on the operation
of the oven. You can set the MINUTE
MINDER at any time and also when the
appliance is off.
1.
Touch
.
and "00" flash in the
display.
2.
Use
or
to set the MINUTE
MINDER. First you set the seconds,
then the minutes and the hours.
3.
Touch
or the MINUTE MINDER
starts automatically after five sec-
onds.
4.
When the set time ends, an acoustic
signal sounds for two minutes and
00:00 and
flash in the display.
5.
Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
7.7 Setting the Time delay
function
The DURATION
and END
func-
tions can be used at the same time, if
the oven is to be activated and deactiva-
ted automatically later. In this case, first
set the DURATION
and then the END
function (refer to "Setting the DURA-
TION" and "Setting the END" ).
When the Time delay function is activa-
ted, the display shows a static symbol of
the oven function,
with a dot and
.
The dot shows which clock function is on
in the Clock / residual heat display.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to the Safety chapters.
8.1 RECIPE MENU
The display shows the shelf posi-
tion and the default cooking
times for all automatic recipes.
14 www.aeg.com