AEG BY9314001M - Manual (Page 44)

Problem Possible cause Remedy
The lamp does not oper-
ate. The lamp is defective. Replace the lamp.
The display shows an er-
ror code that is not in
this list. There is an electrical
fault. • Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows
the error code again,
contact the Service
Center.
The lamp does not oper-
ate. You have selected an
ECO function or Moist
Fan Baking. In these
functions the light can-
not be activated. The light cannot be acti-
vated because these
functions help to save
energy.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on the front frame of the appliance cavi-
ty.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
14. INSTALLATION
WARNING!
Refer to the Safety chapters.
The built-in unit must meet the
stability requirements of DIN
68930.
The oven is designed to be connected
to 230 - 240V ~ (50Hz) electricity supply.
The oven has an easily accessible termi-
nal block which is marked as follows:
Letter L - Live terminal
Letter N - Neutral terminal
- Earth terminal
CAUTION!
This oven must be earthed!
The cable used to connect the oven to
the electrical supply must comply to the
specifications given below.
For UK use only
Connection via Min. size Cable/
flex Cable/flex type Fuse
Cooker Control
Circuit 2,5 mm² PVC / PVC twin
and earth min: 15 A
max: 20 A
It is necessary that you install a double
pole switch between the oven and the
electricity supply (mains), with a mini- mum gap of 3 mm between the switch
contacts and of a type suitable for the
44 www.aeg.com