AEG BY9314001M - Manual (Page 16)

You can find the recipes for the
automatic programmes specified
for this appliance on our website.
To find the proper Recipe Book
check the PNC number on the
rating plate on the front frame of
the appliance cavity.
8.3 Automatic recipes
Setting an automatic recipe:
1. Activate the appliance.
2.
Touch . The display shows , a
symbol and the number of the auto-
matic programme.
3. Touch or to choose the auto-
matic recipe.
4.
Touch or the automatic recipe
activates automatically after five sec-
onds.
5. When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
The appliance deactivates.
6. Touch a sensor field or open the ap-
pliance door to stop the acoustic
signal.
8.4 Automatic programmes
with weight input
If you set the weight of the meat, the ap-
pliance calculates the roasting time.
1. Activate the appliance.
2. Touch .
3.
Touch or to set the weight
programme (refer to the "Recipe
book").
The display shows: the cooking time,
the duration symbol
, a default
weight, a unit of measurement (kg,
g).
4. Touch or the settings save auto-
matically after five seconds.
5. The appliance activates. A symbol of
the weight unit flashes in the display.
During this time you can change the
default weight value with
or .
Touch .
6. When the set time ends, an acoustic
signal sounds for two minutes.
flashes. The appliance deactivates.
7. Touch a sensor field or open the
door to stop the acoustic signal.
8.5 Automatic programmes
with the core temperature
sensor
The core temperature of the food is de-
fault and fixed in programmes which use
the core temperature sensor. The pro-
gramme ends when the appliance is at
the set core temperature.
1. Activate the appliance.
2.
Touch again and again until the
display shows .
3. Install the core temperature sensor
(refer to "The core temperature sen-
sor").
4.
Touch or to see the core
temperature sensor programmes.
When a core temperature sensor
programme is set, the display shows
the cooking time,
and .
5. Touch or the settings save auto-
matically after five seconds.
6. When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
The appliance deactivates.
7. Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
9. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
16 www.aeg.com