AEG BY9314001M - Manual (Page 17)

9.1 Core Temperature Sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to set:
• The oven temperature: refer to the ta-
ble for roasting in the recipe book.
• The core temperature: refer to the ta-
ble for the core temperature sensor in
the recipe book.
Only use the core temperature
sensor supplied or the correct re-
placement parts.
1. Activate the appliance.
2.
Put the tip of the core temperature
sensor (with
on the handle) into
the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows and the de-
fault set core temperature. The tem-
perature is 60 °C for the first opera-
tion, and the last set value for each
subsequent operation.
4.
Touch or to set the core
temperature.
5.
Touch or the settings save auto-
matically after 5 seconds.
Useful information:
You can set the core temperature
only when
flashes. If is in
the display but does not flash before
you set the core temperature, touch
and or to set a new val-
ue.
6. Set the oven function and, if neces-
sary, the oven temperature.
The display shows the current core
temperature and the temperature
bar, which shows the relation be-
tween the set oven temperature and
the current oven temperature.
Useful information:
The core temperature sensor must
stay in the meat and in the socket
during the cooking.
While the appliance calculates the
approximate duration time, the val-
ue of the Count Up Timer function
shows in the Timer / residual heat
display. When the first calculation
ends, an acoustic signal sounds and
the Timer / residual heat display
shows —:— and then the approxi-
mate duration of the cooking. The
appliance continues to calculate the
duration during the cooking. The
display updates at intervals with the
new duration value.
7. When the meat is at the set core
temperature, the core temperature
and
flash. An acoustic signal
sounds for two minutes. Touch a
sensor field to deactivate the acous-
tic signal.
8. Remove the core temperature sen-
sor from the socket and remove the
meat from the appliance.
WARNING!
Be careful when you remove the
core temperature sensor. It is
hot. There is a risk of burns.
9. Deactivate the appliance.
When you put the core tempera-
ture sensor into the socket, you
cancel the settings for the clock
functions.
When you cook with the core tempera-
ture sensor, you can change the temper-
ature shown in the Temperature / Time
display. After you put the core tempera-
ture sensor into the socket and set an
oven function and temperature, the dis-
play shows the current core tempera-
ture.
ENGLISH
17