Care and cleaning, 1 steam cleaning, 2 shelf supports – AEG BY9314001M User Manual

Page 41: Removing the shelf supports, Installing the shelf supports, 3 steam generation system

Advertising
background image

12. CARE AND CLEANING

WARNING!
Refer to the Safety chapters.

Notes on cleaning:
• Clean the front of the appliance with a

soft cloth with warm water and a
cleaning agent.

• To clean metal surfaces, use a usual

cleaning agent.

• Clean the appliance interior after each

use. Then you can remove dirt more
easily and it does not burn on.

• Clean stubborn dirt with a special

oven cleaner.

• Clean all accessories after each use

and let them dry. Use a soft cloth with
warm water and a cleaning agent.

• If you have nonstick accessories, do

not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause damage to the
nonstick coating.

12.1 Steam cleaning

1.

Remove the worst of the dirt man-
ually.

2.

Put approximately 250 ml of water
and 3 tablespoons of vinegar direct-
ly into the steam generator.

3.

Set the Steam Cleaning function. Re-
fer to "Oven functions".

4.

The display shows the duration and
the default temperature. Touch OK
to start the cleaning.

5.

An acoustic signal sounds when the
steam cleaning is completed. Touch
a sensor field to stop the signal.

6.

Clean the appliance with soft cloth.
Remove the water from the steam
generator with the sponge and rub it
dry.
Keep the door open for approxi-
mately 1 hour to let the appliance
dry fully.

You can use the End function to
delay the start of the cleaning.
Refer to "Setting the END".

12.2 Shelf supports

You can remove the shelf supports to
clean the side walls.

Removing the shelf supports

2

3

1

1.

Carefully pull the supports up and
out of the front catch.

2.

Lightly move the supports on the
front catch inwards.

3.

Pull the supports out of the rear
catch.

Installing the shelf supports

Install the shelf supports in the opposite
sequence.

12.3 Steam generation system

CAUTION!
Dry the steam generator after
each use
. Remove the water with
the sponge.

Remove the limescale with water
and vinegar.

CAUTION!
Chemical de-scaling agents can
cause damage to the enamel.
Follow the instructions of the
manufacturer.

Cleaning the water drawer and the
steam generator:

1.

Put the water and vinegar mixture
(approximately 250 ml) through the
water drawer
into the steam gener-
ator. Wait for approximately 10 mi-
nutes.

ENGLISH

41

Advertising
This manual is related to the following products: