Product specifications – AMX UDM-0404 User Manual

Page 14

Advertising
background image

UDM-0404 Multi-Format Distribution Hub

2

UDM-0404 4x4 Multi-Format Distribution Hub

Product Specifications

UDM-0404 Specifications

Power Requirements:

• 90-264V AC, 50/60Hz
• Max power consumption: 130W

Front Panel Components

IR Sensor:

Infrared receive port (IRRX) for learning IR remote control functions from IR con-
trolled devices.

Outputs:

4 RJ-45 ports for connection to Endeleo UDM-RX02 Receivers (via Cat5, Cat5e
or Cat6).

Rear Panel Components

Network Port:

RJ-12 10 BaseT network port is provides network connectivity.

Serial Port:

RJ-12 port allows an administrator to control various functions from a command
line prompt.

IRTX Ports:

2 Infrared Transmit (IRTX) ports allow the UDM-0404 to control IR devices via IR
emitters attached to the UDM. The IR cable is attached to the IR panel of the con-
trolled device to receive IR commands issued through the software or remote
control.

Input Connectors (A-D):

4 sets of Input connections for up to 4 A/V inputs with the following connectors:
• Video
• Audio Left
• Audio Right
• SPDIF

IEC Power Connector:

Universal switch-mode power supply.
• As a Class 1 appliance the UDM-0404 should be connected to a mains supply

with a protective earthing connection.

• The Power On/Off switch is located beside the IEC power connector.
Note: The rating label found beneath the IEC connector contains important
information applicable to the UDM-0404’s installation environment.

Network Interface:

10baseT

Serial Interface:

9600, 8, N, 1

Max Video Input:

• 4 x RGBHV (or)
• 4 x S-Video (or)
• 12 x CVBS (plus)

Operating Environment:

• 35°F - 95°F (5°C - 35°C)
• Max. relative humidity - 85% (non-condensing)

Dimensions (HWD):

1 3/4" x 19" x 12 1/2" (45 mm x 440 mm x 320 mm)

Weight:

8.8 lb. (4 Kg)

Certifications:

• CE/UL/FCC part 15 Class A

Included Accessories:

• IEC power cord
• 19" mounting brackets
• RS-232 DB-9/RJ-12 connection cable
Note: No A/V interface cables supplied.

Other AMX Equipment:

• HD15 to S-Video Cable (FG-UDM-SVID01)
• HD15 to 3x RCA Breakout Cable (FG-HD15RCA3)
• RS232 DB9/RJ12 Connection Cable (FG-RS01)
• UDM-RX02 Multi-Format Receiver (FG-UDM-RX02)
• UDM-RC10 IR Engineering Remote Control (FG-UDM-RC10)
• IR01 IR Emitter Module (FG-IR01)
• IR02 Endeleo IR Splitter Cable (FG-IR02)
• IR03 External IR Receiver Module (FG-IR03)

Advertising