AMX UDM-0404 - Manual (Page 44)

Configuration - Status Page
32 UDM-0404 4x4 Multi-Format Distribution Hub
Issuing Commands To Multiple Ports
As with the input selection it is also possible to send multiple control commands to all or selected ports.
Because the control strings are stored in the UDM Receivers, a global command across multiple ports
will allow any range of display devices to be controlled simultaneously.
1. Select the Include checkboxes for the Ports to be changed (use the Include All link to toggle all Ports
to be included on or off). The ports are highlighted in blue.
2. Open the Control drop-down menu for one of the selected Ports, and select the control to be
executed.
3. Click on Execute button (see FIG. 28 on page 31).
Assigning a Command to an Endeleo UDM-RC02 Remote Control
1. Click on a Port name to access the Port Configuration options for the selected Port.
2. Click the User Control link (FIG. 29). .
This action invokes the User Control options for the selected Port (FIG. 30).
It is also possible to control centrally located hardware such as DVD players, using
the "Devices" page. See the Issuing Commands To a Centrally Located IR
Device section on page 44 for details.
Ensure the Infrared command which the UDM-RC02 Remote control will issue has
been learned by the Hub first. Refer to the Protocols and IR learning section of this
manual.
FIG. 29 Port Configuration options for Port 1 - User Control link
Click to access User Control
options for this Port.
Alternatively, click on the "User Control" link for the relevant Port on the main Status
Page (see FIG. 28 on page 31).