AMX UDM-0404 - Manual (Page 49)

Configuration - Setup Page
37 UDM-0404 4x4 Multi-Format Distribution Hub
Configuration - Setup Page
Overview
Each Hub must be configured for the correct network environment. It is also possible to view device
information, configure the Hub for the correct date and time and specify Restore options, via options in
the Setup page (FIG. 36):
Device Information
The top portion of the Setup page provides several Device Information items as well as Fan control,
SLIP authentication and an option to enable advanced video compensation controls:
FIG. 36 Setup Page
Setup Page - Device Information
Controller firmware: This display-only field indicates the current controller firmware version.
Port: This display-only field indicates the current port (UDM) firmware version.
Input: This display-only field indicates the current input firmware version.
HTML This display-only field indicates the current HTML (WebConsole) version.
Serial number: This display-only field indicates the unique serial number for this UDM Hub.
Internal temp: This display-only field indicates the current internal temperature of the unit.
Fans: These radio buttons allow you to turn off the internal fans. The default setting is
"Auto" (fans will automatically turn on and off based on the internal tempera-
ture reading).
Caution: by turning off the fans, the unit may be susceptible to overheating.
Authenticate SLIP: By default, SLIP authentication is enabled. De-select this option to disable
SLIP authentication.
Enable advanced options: Enable this option to access the advanced video compensation settings (in the
Port Configuration options - see the Advanced Video Compensation section on
page 26).
Device information
Network Configuration
Date / Time Settings
Restore Options