Barco iQ Pro G500 - Manual (Page 134)

14. IQ Network
Image 14-5
When resetting the PC the menuitems in the iQ Pro Server menu are greyed out during a short period.
Projector Standby state setting
This setting defines what should happen with the iQ Pro Server when the projector is switched to standby.
The iQ Pro Server can stay in the ON state or it can be switched OFF
Projector On state setting
This setting defines what should happen with the iQ Pro Server when the projector is switched on.
The iQ Pro Server can stay OFF (switching on can then happen manually in the general menu) or it can be switched on (at the same
time as the projector)
Automatic start up: How to set the automatic startup ?
1. Press MENU to activate the Toolbar
2. Press → to select Installation
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select iQ Pro Server settings
5. Press ENTER
6. A dialogbox is displayed (image 14-6)
7. Select ON for the “Projector On state” setting
The iQ Pro Server will now be automatically switched on at the next startup of the projector
Image 14-6
The iQ Pro Server will be switched on but not necessarily selected by default, go to Source selection in the
menu to select the iQ PC.
128 R5976491 IQ PRO G500 01/02/2007