5 configuring the server software, Configuring the server software, Iq network – Barco iQ Pro G500 User Manual
Page 138
Advertising
14. IQ Network
Image 14-14
14.4.5 Configuring the Server software
Internal network connection
The internal connection ( firmware connection) between the projector controller and the single board computer uses fixed IP ad-
dresses.
The IP address of the SBC can be found in control panel
•
SBC: IP address = 192.168.42.51, subnet mask = 255.255.255.248
Projector Controller’s IP address = 192.168.42.50
Image 14-15
132
R5976491 IQ PRO G500 01/02/2007
Advertising