2 pip select, 3 pip add window, Pip select – Barco iQ Pro G500 User Manual

Page 83: Pip add window

Advertising
background image

8. Tools Menu

8.2

PiP select

PiP layouts

The different PiP layouts (configurations) can be selected in the PiP select menu.

How to change the PiP configuration ?

1. Press MENU to activate the Tool bar

2. Press → to select the Tools item

3. Press ↓ to Pull down the Tools menu

4. Use ↑ or ↓ to select PiP select

5. Press → to pull down the menu

6. Use ↑ or ↓ to select the desired configuration

7. Press ENTER

A white bullet shows the active layout (image 8-3)

Image 8-3

The PiP configuration can also be selected via the dedicated PiP key on the RCU.

8.3

PiP add window

What can be done ?

It is possible to add a window to the existing windows (maximum 4), therefore a source must be selected.

Sources which are already used are non selectable. If, for instance, the PiP layout contains a component video then component
video will be non selectable.

Once added, the window may be altered in several ways to meet particular needs:

repositioning

re-sizing

changing the order

How to add a window ?

1. Press MENU to activate the Tool bar

2. Press → to select the Tools item

3. Press ↓ to Pull down the Tools menu

4. Use ↑ or ↓ to select PiP add window (image 8-4)

5. Press ENTER

The source selection menu is displayed (image 8-5)

In the lower part of the screen appears a wizard in 4 steps (image 8-6)

R5976491 IQ PRO G500 01/02/2007

77

Advertising